Easy To Use Roland GX-24 plastic cutter/plotter is victorious over actually vinyl cutting rookies in mere seconds. DONE.With the Roland GX-24 vinyl cutter/plotter, the opportunities are endless. Rub one final time and gently pull away the transfer paper. Finally, place the design on the item where you want to transfer it to.(The design will stick to the transfer paper) Third, (at home) peel off the backing of the material.Second, place the transfer paper over your sticker and rub.Push the lever away from the machine to remove the material. When the machine stops moving around, it is done. Noteː if you are cutting a design for T-shirts or on windows. If your drawing is turns out to be either to small or to big for your cutting area, you can adjust the page size to or. In the main print window you can also see the size of your drawing (original size).Ĭlick on to go back to the main print window.ġ1. If you have loaded material with setting, then click on to update the cutting area (shortcut). Then click on the button (next to where you select the printer name) to set up the cutting area.Ĭutting area needs to math either to the loaded material or to the size of your drawing. In this window select the right printer name, set the page size to and set orientation to ġ0. (acrobat reader) In the menu go to File > Print. The machine will pull on the material to find the edge.Ĩ. (when you just want to find the starting point at the edge of your material.)ħ.
(like with smaller 'leftover' pieces)Įdge is for letting the machine only find only 1 side of your loaded material. Piece is for letting the machine measure all sides of your loaded sheet. Roll is for setting up the starting point manually. Which option you choose from the menu depends on what material you are loading. Align the material with the wheels, then pull the lever toward you.Ħ.
Important: The machine only works if the wheels are placed within the white markers.ĥ. You can slide the wheels easily by pushing the metal plates on the back of the machine. Position the 2 little wheels on both edges of the material. The roll should be placed in the center of the machine.
When you are feeding the material trough, make sure the lever is pushed away from the machine (so it's open).Ĥ. Pull it about as far as the yellow warning label on the front of the machine. Choose a color, place the roll on the grey tray on the backside of the machine.ģ.
0 kommentar(er)
